Fire alarm panel testing in Calgary
The control panel runs your whole fire alarm system. We check that it picks up problems, sends the right signals, and keeps working if the power goes out.
What we test at the panel
Every signal it should show, every system it should talk to, and the power behind it.
Alarm
We trigger each one and check how the panel responds.
Batteries and power supply
Standby power and battery condition checked, with readings recorded.
Signals to the monitoring station
We confirm the signal actually gets there.
Annunciators and remote panels
Every display and remote panel matches the main panel.
Connected systems
Elevator recall, door release and fan shutdown, if your alarm ties into them.
Event history and programming
We review recent faults and keep a backup of the programming.
What you get
- A panel test record, signal by signal
- Battery readings and when they were last replaced
- A list of any faults, with what we'd do about each
- A repair or upgrade quote if the panel's near the end of its life
How often
- With your annual inspection
- We test the panel as part of your yearly fire alarm inspection.
- After a fault or repair
- We can test it on its own after any trouble or reprogramming.
- Older panels
- Ask us whether parts are still available.
What customers like to know
Can't find your answer? Call (587) 747-3810 and we'll walk you through it.
Is this separate from my annual inspection?
The panel's tested as part of it. If you need a panel test on its own, say after a fault or repair, we can book that too.
My panel's old. Can you still service it?
Often, yes. We'll tell you straight what can be repaired and when it makes more sense to replace it. We work on Autocall, Mircom, Notifier, Siemens and Edwards panels.
Do you replace and upgrade panels?
Yes. We install and upgrade panels, and we're a certified Autocall distributor.
Will my building be unprotected while you test?
We keep the downtime as short as we can, and we agree the plan with you first.
Panel testing is part of a CAN/ULC-S536 inspection.
Not sure where your building stands?
Send us your last report or book a call. We'll tell you what's due, what's failing and what the repairs cost.
