Fire alarm inspection in Calgary
Our ULC certified technicians test your fire alarm system every year to CAN/ULC-S536. Every device gets tested and recorded, and your report shows exactly what passed and what didn't.
What we test
Every device on the system, plus the control panel that runs it.
Control panel
Panel functions, power supply and batteries.
Smoke and heat detectors
Every detector, floor by floor.
Pull stations
Every manual station, at every exit.
Horns and strobes
Sounders and lights in the corridors and common areas.
Duct detectors
Rooftop and in-duct detectors, if you have them.
Devices in suites
Suite smoke alarms and other in-suite devices. One visit per suite.
What you get
- A report to CAN/ULC-S536 with every device recorded
- Pass or fail for each device, and where it is
- A repair quote for anything that fails
- A re-test after repairs, so your report shows a pass
How often
- Full inspection
- Once a year for most commercial and multi-unit buildings.
- Monthly checks
- Available if your building or insurer wants them.
- After repairs
- We re-test the repaired devices so your report is clean.
What customers like to know
Can't find your answer? Call (587) 747-3810 and we'll walk you through it.
Will the alarm go off while Panther tests my building?
For parts of the test, yes. We try to sound only the floor we're testing, and we tell you ahead of time which areas and roughly when, so your residents and staff aren't caught off guard.
How will Panther work with my residents and tenants?
We send you the dates and hours ahead of time so you can post a notice. If we need to get into suites, we aim to enter each one only once.
What if a device in my building fails?
It goes on your report with its exact location. You get a repair quote and nothing happens until you approve it. Once it's fixed, we test it again.
Our fire alarm reports meet CAN/ULC-S536.
Not sure where your building stands?
Send us your last report or book a call. We'll tell you what's due, what's failing and what the repairs cost.
