(587) 747-3810 Book an inspection
All services

Fire alarm panel testing in Calgary

The control panel runs your whole fire alarm system. We check that it picks up problems, sends the right signals, and keeps working if the power goes out.

Call (587) 747-3810

What we test at the panel

Every signal it should show, every system it should talk to, and the power behind it.

  • Alarm

    We trigger each one and check how the panel responds.

  • Batteries and power supply

    Standby power and battery condition checked, with readings recorded.

  • Signals to the monitoring station

    We confirm the signal actually gets there.

  • Annunciators and remote panels

    Every display and remote panel matches the main panel.

  • Connected systems

    Elevator recall, door release and fan shutdown, if your alarm ties into them.

  • Event history and programming

    We review recent faults and keep a backup of the programming.

What you get

  • A panel test record, signal by signal
  • Battery readings and when they were last replaced
  • A list of any faults, with what we'd do about each
  • A repair or upgrade quote if the panel's near the end of its life

How often

With your annual inspection
We test the panel as part of your yearly fire alarm inspection.
After a fault or repair
We can test it on its own after any trouble or reprogramming.
Older panels
Ask us whether parts are still available.

What customers like to know

Can't find your answer? Call (587) 747-3810 and we'll walk you through it.

Is this separate from my annual inspection?

The panel's tested as part of it. If you need a panel test on its own, say after a fault or repair, we can book that too.

My panel's old. Can Panther still service it?

Often, yes. We'll tell you straight what can be repaired and when it makes more sense to replace it. We work on Autocall, Mircom, Notifier, Siemens and Edwards panels.

Can Panther replace or upgrade my panel?

Yes. We install and upgrade panels, and we're a certified Autocall distributor.

Will my building be unprotected while Panther tests?

We keep the downtime as short as we can, and we agree the plan with you first.

Panel testing is part of a CAN/ULC-S536 inspection.

Not sure where your building stands?

Send us your last report or book a call. We'll tell you what's due, what's failing and what the repairs cost.

Call

Tell us about your building

Step 1 of 3

What kind of building is it?

We'll call to confirm the details. No pressure, no spam.